HXE-24VX Super fine copper wire drawing machine
Super fine copper wire drawing machine is used to drawing copper
wire from 0.14mm-0.4mm to 0.025mm-0.08mm
|1. Pay-off stand||1 set|
|2. HXE-24VX Drawing machine||1 set|
|3. Lubrication system||1 set|
|4. Spare parts|
|Slip ratio of machine||8%||10.5%|
|Slip ratio of fix speed capstan||5%||6%|
|Capstan||Ceramic plasma||Ceramic plasma|
|Fix speed capstan diameter(mm)||100||120|
|Frame||Welded by steel plate||Iron cast|
|Power control||Inverter control|
|Transmission type||Flat belt|
|Traversing unit||Ball screw|
strap synchronous motor
|Tension control||No Tension||Weight balance type|
|Lubrication type||Spray type|
|Applicable spooler size (mm)||220||250|
|Spooler capacity (kg)||10||30|
|Bobbin loading&unloading type||Shaft type|
1. Requirement of the workshop arrangement :
If there are lots of machine needed to be installed, please refer
to the attachment the workshop arrangement plan to keep the
equipment in order.
2. Installation of the machine:
The machine should be installed at clean, flat and well ventilated
floor, cushion rubber should be rovided under the bed plate, please
fix the machine on the floor by the founding bolt to prevent shake
and move when the machine is running, also to prevent undesired
stop. The machine use 380V three phase power supply, the three
R.S.T.pillars inside the control box are provided for power
connection, another pillar is for earth connection, please make
sure it is connected.
3. Cooling and lubricating method of the drawing line & the
usage of the lubricating liquid:
A switch type sprinkle is installed on top of the primary drum, it
doesn't affect the operation, No.1 and No.22 hole has separate
lubricating line. For convenient operation, the lubrication liquid
enter the machine from left side through a ball valve. When more
machine are using together, a oil pond should provide for central
cooling and lubrication system, also for filter dirt and copper
chip, and cool down the lubricating liquid.
V. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take
responsibility, but if the Buyer agree, will charge fees
accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the
C. Due to Buyer`s wrong operation that may cause damage to the
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer
should inform Seller in letter form to repair in seven days, If
beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning,
typhoon, earthquake, riots, war, fire or flood) and other factors
that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts
and teach. After warranty, will charge accordingly.